Usb Configuration - TP-Link TD-8817B User Manual

If the result displayed is similar to the screen shown below, it means that your PC has not
connected to the Router.
You can check it follow the steps below:
1) Is the connection between your PC and the Router correct?
The LEDs of LAN port which you link to the device and the LEDs on your PC's adapter should
be lit.
2) Is the TCP/IP configuration for your PC correct?
If the Router's IP address is 192.168.1.1, your PC's IP address must be within the range of
192.168.1.2 ~ 192.168.1.254.

3.2 USB Configuration

If you use the USB interface, First, you must install the USB's driver to the computer. You can
obtain the drivers from the provided CD or download from our website. (http://www.tp-link.com)
USB Drive installation procedures
Step 1: Please connect your PC to the Router through the USB port at first, then open the
relative operating system folder in the CD, and double click Setup.exe to install the USB
driver.
Step 2: Soon, Figure 3-7 will display after a moment. Click Next to continue.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide
Figure 3-6
9