Table of Contents
Advertisement
Option
Dell Wyse P25/P45 BIOS Access
Power Cycle Request
iDRAC Settings utility
The iDRAC settings utility is an interface to set up and configure the iDRAC parameters by using UEFI. You can enable or disable various
iDRAC parameters by using the iDRAC settings utility.
NOTE:
Accessing some of the features on the iDRAC settings utility needs the iDRAC Enterprise License upgrade.
For more information about using iDRAC, see Dell Integrated Dell Remote Access Controller User's Guide at Dell.com/poweredgemanuals.
Entering the iDRAC Settings utility
1
Turn on or restart the managed system.
2
Press F2 during Power-on Self-test (POST).
3
On the System Setup Main Menu page, click iDRAC Settings.
The iDRAC Settings screen is displayed.
Changing thermal settings
About this task
The iDRAC settings utility enables you to select and customize the thermal control settings for your system.
NOTE:
Selection of thermal profile does not change the default Fan speed. Fan speed automatically changes as per the system
temperature irrespective of the THERMAL PROFILE in effect or select the Custom fan speed option to set it to desired speed.
Steps
1
Click iDRAC Settings > Thermal.
2
Under SYSTEM THERMAL PROFILE > Thermal Profile, select one of the following options:
•
Default Thermal Profile Settings
•
Maximum Performance (Optimized)
•
Minimum Power (Performance per Watt Optimized)
3
Under USER COOLING OPTIONS, set the Fan Speed Offset, Minimum Fan Speed, and Custom Minimum Fan Speed.
4
Click Back > Finish > Yes.
Device Settings
Device Settings enables you to configure device parameters.
Dell Lifecycle Controller
Dell Lifecycle Controller (LC) provides advanced embedded systems management capabilities including system deployment, configuration,
update, maintenance, and diagnosis. LC is delivered as part of the iDRAC out-of-band solution and Dell system embedded Unified
Extensible Firmware Interface (UEFI) applications.
46
Installation and Service Manual
Pre-operating system management applications
Description
Enables or disables the Dell Wyse P25/P45 BIOS Access. This option is set to Enabled by
default.
Enables or disables the Power Cycle Request. This option is set to None by default.
Advertisement
Table of Contents
