Switching Between Priority Channels; Setting A Second Priority Channel; Sensitivity; Switching Sensitivity Modes - Raymarine RAY91 VHF Installation And Operation Instruction Manual

Switching between priority channels

1. Press the 16 / + button to switch between priority channels.

Setting a second priority channel

You can select which channel you want to use as the second priority channel.
From the Channel set-up menu: Menu > Set-up > Channel set-up.
1. Select 2nd priority channel.
2. Select the channel that you want to assign as the second priority channel.

8.4 Sensitivity

The sensitivity level of the radio can be set to Local mode or Distant mode.
Local mode decreases the receiver sensitivity in high traffic areas to reduce unwanted reception.
When in Local mode the 'Loc' icon is displayed in the status bar.
Distant mode sets the receiver sensitivity to full.

Switching sensitivity modes

You can switch between Local and Distant modes at any time.
From the Set-up menu: Menu > Set-up.
1. Select Sensitivity.
Selecting Sensitivity will switch between Local mode and Distant mode (default).

8.5 Private channels

The radio may be able to receive additional Private channels depending on the country it is used in
and whether the appropriate licenses are held.
The following Private channel sets can be selected:
• None
• Belgium
• Denmark (pleasure)
• Denmark (fishing)
• Finland (pleasure)
• Finland (fishing)
• Holland (Netherlands)
• Norway (pleasure)
• Norway (fishing)
• Sweden (pleasure)
• Sweden (fishing)
• UK

Selecting a private channel set

You can select the set of private channels you want to use.
From the Channel set-up menu: Menu > Set-up > Channel set-up.
1. Select Private channels.
The list of private channel sets is displayed:
2. Select the required private channel set.
VHF operations
107