Table of Contents
Advertisement
7
Image Acquisition and Camera Operational Modes (GenICam)
Please refer to another chapter for the method of switching Trigger.
GenICam Parameters
TriggerSelector
TriggerMode
TriggerSource
ExposureMode
Please refer to IO function for the (*) Line.
7.1
Free run
Free run mode outputs the camera video image continuously.
In order to run Free run Mode, all trigger functions must be set to OFF via the Trigger mode.
Exposure time determines Exposure Mode. When Exposure Mode is turned off, the frame exposure will complete.
When Exposure Mode is set to Timed, the Exposure Time value will be set as the exposure time.
露光
Exposure
VideoOut
映像出力
(*) The camera is set to Free run mode as the default mode.
STC-MBS312U3V / STC-MCS312U3V / STC-MBS500U3V / STC-MCS500U3V
Product Specifications and Use's Guide
For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *aegis-g2@aegiselect.com *http://www.aegiselect.com
IEnumeration Type
Select Trigger function
IEnumeration Type
Select ON / OFF which was selected function on TriggerSelector
On: Trigger function ON, Off: Trigger function Off
IEnumeration Type
Set Trigger Source which was selected function on TriggerSelector
Software: Trigger control through TriggerSoftware command
LineN: Trigger control through hardware trigger (N: Line number)
IEnumeration Type
Select Exposure mode
ExposureTime
No.16S024-02
29/64
Advertisement
Table of Contents
