Cisco Catalyst IW9165D Hardware Installation Manual page 29

Installation Overview
Figure 15: Attaching Mounting Bracket to the AP
1 M6 Bolts
3 Mount Bracket
Step 4 Position the four bolts on the access point into the keyhole slots on the mounting bracket.
Step 5
Slide the access point down to sit securely in the quick mount notches.
Step 6 Using a 10mm wrench, secure the AP to the bracket by tightening the bolts to the bracket; torque to 30-40 in-lbs.
Wall Mounting the Access Point with the Fixed Mounting Kit
2
Cisco Catalyst IW9165D Heavy Duty Access Point Hardware Installation Guide
Quick Mount Keyhole Slots (for AP use)
21