Cisco Catalyst IW9165D Hardware Installation Manual page 22

Cisco Orderable Accessories
Cisco PID
IW-ACC-PMK1=
AIR-ACC1530-PMK1=
• Accessory kits
Cisco PID
IW-ACC-M12ETH=
IW-ACC-M12PWR=
• M12 Cables
Cisco PID
CAB-PWR-M12-10=
CAB-RJ45-M12-10=
• RF Coaxial Adapters
Cisco PID
AIR-ACC370-NF-NF=
• RF Coaxial Cables
Cisco PID
CAB-L400-5-N-N=
CAB-L400-5-N-NS=
AIR-CAB010LL-N=
CAB-L400-20-N-N=
AIR-CAB025HZ-N=
CAB-L600-30-N-N=
• Lightning Arrestors
Lightning Arrestor
CGR-LA-NM-NF=
ACC-LA-G-TM-TF=
• Power adapter and power injectors when PoE is not available
Cisco Catalyst IW9165D Heavy Duty Access Point Hardware Installation Guide
14
Description
Pole/wall mounting bracket with tilt and rotation
Standard pole/wall mount braket
Description
Adapter, M12 X-code to RJ45 Ethernet connector
Adapter, M12 4 Pin A-Code to Micro-fit power connector
Description
M12 DC power cable, 4 pins, A-Code, 10 ft
M12 to RJ-45 Ethernet cable, 8 pins, X-Code, 10 ft
Description
N(f) to N(f) RF adapter DC-11 GHz
Description
5 ft. LMR-400-DB, N(m)-STR to N(m)-R/A
5 ft. LMR-400-DB, N(m)-STR to N(m)-STR
10 ft. LMR-400-DB, N(m)-STR to N(m)-STR
20 ft. LMR-400-DB, N(m)-STR to N(m)-RA
25 ft. LMR-400-DB/FR/CMR, N(m)-STR to N(m)-RA
30 ft. LMR-600-DB, N(m)-STR to N(m)-RA
Description
Lightning Arrestor kit, N(m) to N(f)
Lightning Arrestor kit, TNC(f) for GNSS
Unpacking Your Access Point