Table of Contents
Advertisement
Pairing
Pairing Instructions
You might have already noticed that there is no channel switch on the camera
– so, how do you assign the cameras to the channel you want? The answer is
"pairing".
Pairing, in a nutshell, is a process which associates one camera with one channel,
hence "pairing" them together. There are no physical switches to worry about,
the change is handled by the software in the receiver. The camera and receiver will
retain their pairings even if the power is disconnected and restored.
To pair a camera with one channel on the receiver:
•
Press the MENU button on the receiver.
•
Using the arrow buttons, navigate to "Pairing".
•
Press PLAY/ENTER.
•
Using the LEFT and RIGHT arrows, choose the channel you would like to pair
the camera to, from 1 to 4. Press PLAY/ENTER to confirm.
•
Once you've selected the channel you'd like to pair a camera to, a countdown
will appear on screen, counting down from 30.
•
Whilst this countdown is in progress, press the pairing button on the rear of
the camera you'd like to pair with this channel.
Note: Only one camera can be paired to a channel at a time, and pairing a camera
to a channel which already has a paired camera will replace the previously paired
camera.
The Main Menu with the
Pairing Menu selected.
The Pairing Menu with
the Channel 1 selected.
7
Advertisement
Table of Contents
