Before You Begin FCC Verifi cation: NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are de- signed to provide reasonable protection against harmful interference in a residen- tial installation.
Viewing the Camera on a TV or VCR Tips & Suggestions Troubleshooting Guide Technical Specifi cations Helpdesk / Technical Support Details Warranty Information Package Contents PNP-155 Security Camera Operating Instructions Screws & wall plugs Security Stickers Power Adapter Extension cable BNC to RCA adapter...
Connection Guide Connect the camera’s DC and BNC socket cable to the extension cable’s DC and BNC plugs 2A. Connecting Directly to TV Connect the BNC plug on the extension cable into the BNC socket on the RCA to BNC adapter. Then connect the RCA plug on the RCA to BNC Adapter (which should be plugged into the extension cable) to the VIDEO INPUT connection on the backof your TV.
Page 5
Plug in the camera power adapter into the wall Connect the extension cables socket DC socket to the DC plug on the power adapter 2B. Connecting to Your Existing DVR Connect the extension cables BNC plug to a BNC socket (CH1, CH2, CH3 or CH4) on the back of the DVR...
Viewing the Camera on a TV or VCR Viewing the PNP-155 on a TV After connecting the PNP-155 Camera directly to your TV and powering it on as described on page 4, tune the TV to the correct input channel.
Solution: Connect the BNC to RCA adapter to the end of the Extension Cable and plug into the TV. Problem: On my Swann DVR, Video Loss appears where my camera should be. Solution: Check the Extension cable is securely connected to the camera and check the connection is secure on the back of the DVR.
Swann. The end user is responsible for all freight charges incurred to send the product to Swann’s repair centres. The end user is responsible for all shipping costs incurred when shipping from and to any country other than the country of origin.