Suunto Mosquito User Manual page 27

• the instrument displays correct temperature
and depth (0.0 m [0 ft])
• the buzzer beeps
• you have preset desired displays on the User
Defi nable Display Field
• the altitude and personal adjustment settings
are correct (Air and EAN modes)
And if set to EAN mode, make sure that:
• the oxygen percentage is adjusted according
to the measured Nitrox blend in your
cylinder
• the oxygen partial pressure limit is set
correctly.
The Mosquito is now ready for diving.
NOTE: The surface interval time does not run before
the fi rst dive.
Fig. 3.5. Startup IV . Free mode. Depth and dive time are zero.
Pressing +/- button activates alternative display of maximum
depth and current time or dive number.
Fig. 3.4. Startup III. Surface
mode (Air). Depth and dive
time are zero. Pressing +/-
button activates alternative
display of maximum depth and
current time.
25