Dive Alarm Settings [Dive Al] - Suunto Mosquito User Manual

4.4. DIVE ALARM SETTINGS
[DIVE AL]
You can set one depth alarm in the Mosquito. When
the depth alarm activates, the -symbol blinks as long
as the present depth value exceeds the adjusted value
and the alarm sounds for 24 seconds. Press any button
to stop the audible alarm, after it has activated.
To set the depth alarm:
1. In the Setting Mode [SET], press S four (4) times
to select the Dive Alarm Setting Mode (Fig. 4.10.).
2. Wait two seconds until the Dive Alarm Setting
Mode activates automatically. The alarm status [On/
OFF] starts to blink on the display (Fig. 4.11.).
3. Press S to change the selection in the following
sequence.
->On/OFF status -> depth alarm limit -> dive time
alarm minutes (-> dive time alarm seconds)
Fig. 4.10. Dive Alarm Setting
Mode.
Fig. 4.11. Dive Time Alarm.
Center window displays less
than 5 minutes dive time.
73