Table of Contents
Advertisement
On the surface the FAVOR AIR is operated by simultaneously touching the COM
contact and one or two of the other contacts. When doing this, your finger tips should be
wet or moist to establish the necessary electric contact. When submerged these
contacts are automatically connected by the conductivity of the water.
The FAVOR AIR is controlled on the surface with the COM (common), PLAN/ON and
TIME/MODE contacts as follows:
Activation:
touch the PLAN/ON and COM contacts.
Dive planning: once the FAVOR AIR has been activated, touch the PLAN/ON and COM
contacts.
Clock:
once the FAVOR AIR has been activated, touch the TIME/MODE and
COM contacts for two seconds. The time is then displayed for four
seconds.
When the TIME/MODE and COM contacts are touched for over three seconds, the
display will start to scroll through the below mentioned modes. Lift your fingers when the
desired mode is displayed.
Logbook memory:
Dive history memory:
Personal/altitude adjustment setting:
Time setting:
Return:
You may sometimes encounter problems in using the contacts, or the FAVOR AIR may
activate on its own. The reason for this is probably contamination or invisible marine
growth that may create an unwanted electric current between the water contacts. It is
therefore important that the FAVOR AIR be carefully washed in fresh water after the
day's diving is completed. The contacts can be cleaned with a soft pencil eraser.
3.2.2 Tap Switch
The tap switch is used to activate the backlite and to retrieve the time during diving. The
at LOG the logbook memory is accessed.
at HIS the history memory is accessed.
at Alt the personal and/or altitude adjustment
mode can be set.
at Set the time and date can be adjusted.
you can at any time exit the above modes by
touching all three contacts at the same time.
First make contact between the PLAN/ON
and TIME/MODE contacts, e.g. by covering
both contacts with your right thumb. Without
lifting your right thumb, touch the COM contact
with your left thumb. Alternatively, you can exit
the modes simply by submerging the FAVOR
AIR in water.
10
Hide quick links:
Advertisement
Table of Contents
