Replacing Battery - Suunto Core User Manual

8 REPLACING BATTERY

Your Suunto Core operates on a 3-volt lithium cell, type: CR 2032.
NOTE: To reduce the risk of fire or burns, do not crush, puncture or dispose of
used batteries in fire or water. Replace the battery with a manufacturer-approved
battery only. Recycle or dispose of used batteries properly.
To change the battery:
1. Use a coin to open the battery compartment on the back of your device.
Ensure that the O ring and all surfaces are clean and dry.
2. Remove the old battery.
3. Place the new battery into the battery compartment with the positive
side facing up.
4. Slide the battery gently against the contact plate, ensuring that the
contact plate does not break or bend.
5. When replacing the cover, rotate it carefully counter-clockwise with
your thumb in order to align the threads. The cover should rotate easily
without having to use force. If you have to use force, the threads are
misaligned and they may be damaged.
6. Tighten the cover.
en
43