Suunto Core User Manual page 28

is displayed when your altitude is the same as at the starting point.
is displayed when your altitude is below the starting point.
is displayed when you view how much you have ascended from the log
start.
is displayed when you view how much you have descended from the log
start.
Altitude points are recorded according to the recording interval you have
chosen (see Section 7.3 Choosing recording interval on page 41).
To change the recording rate:
1. In , select
MENU
2. Select
REC INTERVAL
3. Change the recording rate with [+] and [- Light].
NOTE: An estimation of how much time you can record is shown in the lower
part of the display when you browse between the recording rates. The actual
recording durations may vary slightly depending on your activity during the
recording period.
You can access your history of recorded logs, including log details, from
in
LOGBOOK MENU
TIP: When you have stopped the log recorder, you can enter the logbook and
view your current recordings before you reset the recorder.
.
MEMORY
.
(see Section 7.2 Viewing and locking logs on page 39).
en
25