Compact Flash Master/Slave Enable/Disable - Supermicro X7DWA-N User Manual

Compact Flash Master/Slave
Select
A Compact Flash Master/Slave Select
Jumper is located at JCF1. Close this
jumper to enable Compact Flash Card. For
the Compact Flash Card or the Compact
Flash Jumper (JCF1) to work properly, you
will need to connect the Compact Flash
Card power cable to JWF1 fi rst. Refer to
the board layout below for the location.
LAN1/2
CD1
HD
Audio
IPMI
PCI-Exp x16
PCI-33MHz
IPMB
CPU
Fan 1
SMB_PS PSF
J3P
JAR
A
2-29
Chapter 2: Installation
Compact Flash Card Master/
Slave Select
Jumper Defi nition
Open Slave
Closed Master
A. Compact Flash Master/
8-pin PWR
Slave Select