Supermicro X7DWA-N User Manual page 86

X7DWA-N User's Manual
Password on Boot
This setting allows you to determine if a password is required for a user to enter
the system at system boot. The options are Enabled (password required) and
Disabled (password not required).
4-6 Boot
Choose Boot from the Phoenix BIOS Setup Utility main menu with the arrow keys.
You should see the following display. See details on how to change the order and
specs of boot devices in the Item Specifi c Help window. All Boot BIOS settings
are described in this section.
Boot List
Candidate
List
Boot Priority Order/Excluded from Boot Orders
The devices included in the boot list section (above) are bootable devices listed
in the sequence of boot order as specifi ed. The boot functions for the devices
included in the candidate list (above) are currently disabled. Use a <+> key or a
<-> key to move the device up or down. Use the <f> key or the <r> key to specify
the type of an USB device, either fi xed or removable. You can select one item from
the boot list and hit the <x> key to remove it from the list of bootable devices (to
make its resource available for other bootable devices). Subsequently, you can
select an item from the candidate list and hit the <x> key to remove it from the
candidate list and put it in the boot list. This item will then become a bootable
device. See details on how to change the priority of boot order of devices in the
"Item Specifi c Help" window.
4-26