Ide Connectors - Supermicro X7DWA-N User Manual

IDE Connectors

There are two IDE Connectors
(JIDE1: Blue, JIDE2: White) on
the motherboard. The blue IDE
connector (JIDE1) is designated
the Primary IDE Drive. The white
IDE connector (JIDE2) is desig-
nated the Secondary IDE Drive,
reserved for Compact Flash Card
use only. (See the Note below.)
See the table on the right for pin
defi nitions.
Note: JIDE2 (the white slot) is
reserved for Compact Flash Card
only. Do not use it for other de-
vices. If JIDE2 is populated with
a Compact Flash Card, JIDE1
(the blue slot) will be available for
one device only. For the Compact
Flash Card to work properly, you
will need to connect a power cable
to JWF1 fi rst.
LAN1/2
CD1
HD
Audio
IPMI
PCI-Exp x16
PCI-33MHz
IPMB
Pin#
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
CPU
Fan 1
SMB_PS PSF
J3P
JAR
C
2-35
Chapter 2: Installation
IDE Drive Connectors
Pin Defi nitions
Defi nition Pin # Defi nition
Reset IDE 2 Ground
Host Data 7 4 Host Data 8
Host Data 6 6 Host Data 9
Host Data 5 8 Host Data 10
Host Data 4 10 Host Data 11
Host Data 3 12 Host Data 12
Host Data 2 14 Host Data 13
Host Data 1 16 Host Data 14
Host Data 0 18 Host Data 15
Ground 20 Key
DRQ3 22 Ground
I/O Write 24 Ground
I/O Read 26 Ground
IOCHRDY 28 BALE
DACK3 30 Ground
IRQ14 32 IOCS16
Addr1 34 Ground
Addr0 36 Addr2
Chip Select 0 38 Chip Select 1
Activity 40 Ground
A. IDE#1
8-pin PWR
B. IDE#2 (Compact Flash)
A
B