Console Redirection; Flow Control - Supermicro X7DBR-3 User Manual

X7DBR-3/X7DBR-E User's Manual

Console Redirection

Access the submenu to make changes to the following settings.
COM Port Address
This item allows you to specify which COM port to redirect the console to:
Onboard COM A or Onboard COM B. This setting can also be Disabled.
BAUD Rate
This item allows you to set the BAUD rate for console redirection. The options
are 300, 1200, 2400, 9600, 19.2K, 38.4K, 57.6K, and 115.2K.
Console Type
This item allows you to select the console type for console redirection. The
options are VT100, VT100,8bit, PC-ANSI, 7bit, PC ANSI, VT100+,
VT-UTF8
and ASCII.

Flow Control

This item allows you to set the fl ow control for console redirection. The options
are: None, XON/XOFF, and CTS/RTS.
Console Connection
This item allows you to decide how console redirection is to be connected: either
Direct or Via Modem.
Continue CR after POST
This item allows you to decide if you want to continue with console redirection
after POST routines. The options are On and Off.
4-16