Hdd Led; Nic1/Nic2 Leds - Supermicro X7DBR-3 User Manual

HDD LED

The HDD LED connection is located
on pins 13 and 14 of JF1. Attach a
hard drive LED cable here to display
disk activity (for any hard drives on
the system, including SAS, Serial ATA
and IDE). See the table on the right
for pin defi nitions.
NIC1/NIC2 LED Indicators
The NIC (Network Interface Control-
ler) LED connection for GLAN port1 is
located on pins 11 and 12 of JF1 and
the LED connection for GLAN Port2
is on Pins 9 and 10. Attach the NIC
LED cables to display network activity.
Refer to the table on the right for pin
defi nitions.
A. HDD LED
B. NIC1 LED
C. NIC2 LED
GLAN1
PCI-X 100MHz ZCR
SXB-
PCI-X 133MHz
GLAN2
SAS
CTRLR
PWR
4-pin
8-pin PWR
SMB
PWR
JPWF
SXB-
SXB-
JOH1
2-11
Chapter 2: Installation
HDD LED
Pin Defi nitions (JF1)
Pin# Defi nition
13 +5V
14 HD Active
GLAN1/2 LED
Pin Defi nitions (JF1)
Pin# Defi nition
9/11 Vcc
10/12 PWR Fail
20 19
Ground
X
Power LED
A
HDD LED
B
NIC1 LED
C
NIC2 LED
OH/Fan Fail LED
PWR Fail LED
Ground
Ground
2 1
NMI
X
Vcc
Vcc
Vcc
Vcc
Vcc
Vcc
Reset
Reset Button
Power Button
PWR