Supermicro X7DB8 User Manual page 62

X7DB8/X7DBE User's Manual
IDE Channel 0 Master/Slave, IDE Channel 1 Master/Slave, SATA
Port2 and SATA Port3
These settings allow the user to set the parameters of IDE Channel 0 Master/
Slave, IDE Channel 1 Master/Slave, IDE Channel 2 Master, IDE Channel 3
Master slots. Hit <Enter> to activate the following sub-menu screen for detailed
options of these items. Set the correct confi gurations accordingly. The items
included in the sub-menu are:
Type
This item allows you to select the type of IDE hard drive. Select Auto to allow
the BIOS to automatically determine the hard drive's capacity, number of heads,
etc.). Enter a number from 1-39 to select a predetermined type of hard drive.
Select User to allow the user to enter the parameters of the HDD installed at
this connection. Select CDROM if a CDROM drive is installed. Select ATAPI if
a removable disk drive is installed.
4-4