Quick Reference - Supermicro X7DB8 User Manual

Quick Reference ( X7DB8/X7DBE)
Jumper Description
2
J27, J28 I C Bus to PCI-X/PCI-E Slots
J3P 3rd PWR Failure Detect
JBT1 CMOS Clear
JCF1 Compact Card Master/Slave Select
JPA1 (*X7DB8) SCSI Controller Enable
JPA2, JPA3 SCSI CHA(JPA2),CHB(JPA3)Term.En Off (Enabled) (*X7DB8)
JPG1 VGA Enable
JPL1/ JPL2 GLAN1/GLAN2 Enable
JWD Watch Dog
Connector
ATX PWR (JPW1)
Aux. PWR/CPU PWR
Alarm Reset (JAR)
Chassis Intrusion (JL1)
COM1/COM2
Compact PWR (JWF1)
DA1/DA2
DIMM#1A-DIMM#4B
FAN 1-8
Floppy (J22)
FP CTRL (JF1)
GLAN 1/2 (JLAN1/2)
IDE1/IDE2 (Note)
Keylock (JK1)
OH LED (JOH1)
Parallel (J21)
PSF
PWR LED (LE1)
PWR LED/SPKR (JD1)
PWR SMB (J17)
SATA0-SATA5
SCSI Chan. A/B(JA1/JA2)SCSI Channel A/Channel B Connectors (*X7DB8 only)
SGPIO 1/2(J29,J30)
SMB (J18)
Slot 7
USB 0/1,USB 2/3, USB4 Back Panel USB 0/1, Front Panel USB 2/3, FP USB4
VGA (J15)
WOL (JWOL)
WOR (JWOR)
Note: JIDE2 is for Compact Card Use only. For Compact Card to work properly,
please enable JCF1 by putting cap on it and connect JWF1 to a power supply.
Description
Primary 24-Pin ATX PWR Connector
+12V 4-pin PWR (JWP2)/+12V 8-pin PWR(JPW3)
Alarm Reset Off (Normal)
Chassis Intrusion Header
COM1/COM2 Serial Port Connectors
Compact Card PWR Connector (*Used if JCF1 is on.)
SCSI Activity LED Indicators (See Chapter 2)
Memory FBD DDRII Slots
Fans 1-8 (CPU Fans/Chassis Fans)
Floppy Disk Drive Connector
Front Control Panel Connector
G-bit Ethernet Ports
IDE1 Hard Drive (JIDE1)/Compact Flash Card (JIDE2)
Keylock Header
Overheat LED
Parallel (Printer) Port
Power Supply Failure (See Chapter 2)
PWR LED Indicator (Note 6 on Pg.1-4)
PWR LED(pins1-3)/SpeakerHeader (pins 4-7)
Power System Management (I
SATA 0-5 Connectors
Serial General Purpose Input/Output Headers
System Management Bus Header
SIM Low Profi le IPMI Connector
VGA Connector
Wake-on-LAN Header
Wake-on-Ring Header
1-5
Chapter 1: Introduction
Default Setting
Open
(Disabled)
Off (Disabled)
See Chapter 2
On (Master)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Reset)
2
C) Header