Glan (Ethernet Ports) - Supermicro X7DB8 User Manual

GLAN 1/2 (Giga-bit Ethernet
Ports)
Two G-bit Ethernet ports are desig-
nated JLAN1 and JLAN2 on the IO
backplane. This port accepts RJ45
type cables.
Power LED/Speaker
On the JD1 header, pins 1-3 are for
a power LED and pins 4-7 are for the
speaker. See the table on the right
for speaker pin definitions.
The speaker connector pins are for
use with an external speaker. If you
wish to use the onboard speaker, you
should close pins 6-7 with a jumper.
GLAN1
A
GLAN2
SIMLP IPMI
SEPC
PCI-Exp x8
PCI-Exp x4
GLAN1
Speaker Connector
Pin Setting
Note:
Pins 6-7
Pins 4-7
8-pin PWR
PSF
SMB PS
J3P
JAR
SCSI CTRL
320 SCSI Channel B
2-19
Chapter 2: Installation
GLAN2
Pin Defi nitions
Defi nition
Internal Speaker
External Speaker
A. GLAN1/2
B. PWR LED/Speaker
B