Trane TZON1050AC52ZAA Manual page 22

Changing the Schedule (cont.)
Changing Period Start or End Times
1. Press anywhere in a Period to make it active.
Other Periods will dim and the Start and
End times for this Period will be in black
boxes at the top of the screen.
2. Press TIME START or TIME END and
adjust the time using the UP and DOWN
arrows. Note: The XL1050 uses intelligent
technology and will not allow setting an
illogical start or end time. Periods must be
at least 30 minutes in duration.
Changing Period Set Points
1. Press the active Period's Cooling or Heating
Temperature Set Point.
2. Adjust the Set Point using the UP or DOWN
arrows.
Changing the Period Name
1. Press the PERIOD NAME (Wake, Away, etc.).
2. Select a predefi ned name or press NEW and
select NEXT.
3. If selecting a new name, enter the name
using the on-screen keyboard.
4. Press NEXT.
page 22
Press to adjust start and
end times
Schedule
6:00am 8:00am
Time
75º
Start
Wake
Time
End
70º
To rename a Period,
press in the gray area.
To change temperature settings press in the red or blue
area, then adjust the setting up or down with the arrows
on the right.
Mon Tue Wed Thu
6:00pm
Cool To
75º
Away
70º
Apply
When all changes have been made, press Apply
to save and exit or press cancel to discard all
changes that were made to this schedule.
Fri Sat Sun
10:00pm
75º 75º
Day
Home Sleep
70º 70º
Cancel
XL1050 User Guide