Advertisement
Insert front brace under control panel and between cart side panels.
6
Secure using two 1/4-20x1½" screws, 7mm lock washers, and 7mm
flat washers on each side.
NOTE: Do not fully tighten screws as some adjustments may
need to be made when installing Doors on step 15.
On back of grill, place upper back panel between side panels and
7
above lower back panel. Secure upper back panel, in lower holes,
using one 1/4-20x1½" screw, 7mm lock washer, and 7mm flat
washer on each side. Do not fully tighten screws until side shelf
installation is complete in later steps.
16 • 463272108
Front brace
Door Pin in
downward
position
7mm lock
washer
7mm flat
washer
1/4-20x1½"
7mm lock
7mm flat
screw
washer
washer
Rear upper panel
1/4-20x1½" screw
Advertisement
