Supermicro PDSMi User Manual page 62

PDSMi User's Manual
I/O Device Confi guration
Access the submenu to make changes to the following settings.
KBC Clock input
This setting allows you to set the clock frequency for the Keyboard Clock. The
options are 6MHz, 8MHz, 12 MHz, and 16MHz.
Serial Port A
This setting allows you to decide how Serial Port A is controlled. The options
are Enabled (user defi ned), Disabled, and Auto (BIOS- or OS- controlled).
Base I/O Address
This setting allows you to select the base I/O address for Serial Port A. The
options are 3F8, 2F8, 3E8, and 2E8.
Interrupt
This setting allows you to set the Interrupt for Serial Port A. The options are
IRQ3 and IRQ4.
Serial Port B
This setting allows you to decide how Serial Port B is controlled. The options
are Enabled (user defi ned), Disabled, and Auto (BIOS- or OS- controlled).
Mode
This feature allows the user to set the mode for Serial Port B. The options
are Normal and IR.
Base I/O Address
This setting allows you to select the base I/O address for Serial Port B. The
options are 3F8, 2F8, 3E8 and 2E8.
Interrupt
This setting allows you to set the Interrupt for Serial Port B. The options are
IRQ3 and IRQ4.
Parallel Port
This setting allows you to assign control of the Parallel Port. The options are
Enabled (user defi ned), Disabled, and Auto (BIOS- or OS- controlled).
Base I/O Address
This setting allows you to select the base I/O address for the Parallel Port.
The options are 378, 278, and 3BC.
4-14