Removing The Battery - Clevo NL40MU1 Service Manual

Removing the Battery

Note that battery removal procedure will differ depending on the battery type installed:
• See 36WH Battery Upgrade Process on
• See 48WH Battery Upgrade Process on
36WH Battery Upgrade Process
1. Turn off the computer, turn it over.
2. Remove screws - on the bottom case
1 11
-
3. Note to remove screws
6
)
as shown (Figure 1b .
4. Carefully lift the bottom case
5. The battery will be visible at point
a.
1
2
10
11
9
8
page 2 - 5
page 2 - 7
(Figure 1a).
, do so with the screwdriver angled at about 90 degrees to the computer surface
9
up.
12
on the computer (Figure 1c).
13
b.
4
3
5
6
7
9
c.
7
8
12
13
Disassembly
Figure 1
Battery Removal -
36WH
a. Remove the screws.
b. Remove the bottom case.
c. Locate the battery.
6

12. Bottom Case
• 11 Screws
Removing the Battery 2 - 5