Clevo NL40MU1 Service Manual page 10

Preface
Related Documents
You may also need to consult the following manual for additional information:
User's Manual on CD/DVD
This describes the notebook PC's features and the procedures for operating the computer and its ROM-based setup pro-
gram. It also describes the installation and operation of the utility programs provided with the notebook PC.
System Startup
1. Remove all packing materials.
2. Place the computer on a stable surface.
3. Insert the battery and make sure it is locked in position.
4. Securely attach any peripherals you want to use with the
computer (e.g. keyboard and mouse) to their ports.
5. When first setting up the computer use the following
procedure (as to safeguard the computer during shipping,
the battery will be locked to not power the system until first
connected to the AC/DC adapter and initially set up as

below):
• Attach the AC/DC adapter cord to the DC-In jack on the
Powering the
right of the computer, then plug the AC power cord into
Computer On
an outlet, and connect the AC power cord to the AC/DC
After every disassem- adapter. The battery will now be unlocked.
bly, make sure that the
6. Use one hand to raise the lid/LCD to a comfortable viewing
bottom case's screws
angle (do not exceed 180 degrees); use the other hand (as
are all inserted and
illustrated in Figure 1) to support the base of the computer
tightened before turn-
(Note: Never lift the computer by the lid/LCD).
ing the computer on.
7. Press the power button on the left side of the computer to
turn the computer "on" (note that the lid/LCD must be open
for the power button to function).
VIII
°
180
Figure 1
Opening the Lid/LCD/Computer
with AC/DC Adapter Plugged-In

Shut Down
Note that you should always shut your computer down by choosing the
Shut down command in Windows (see below). This will help prevent
hard disk or system problems.
Click Settings in the Charms Bar (use the Windows Logo Key
+ C key combination to access the Charms Bar) and choose Shut
down from the Power menu.
Or
Choose Shut down or sign out > Shut down from the context menu
(use the Windows Logo Key + X key combination to access the
context menu).