Canon MAXIFY GX2000 Series Online Manual page 603

If brightness is set low, increase brightness setting and try printing again.
Check 5
If you are printing with a low brightness setting on plain paper, the paper may absorb too much ink and become
wavy, causing paper abrasion.
• • Printing from your computer (Windows)
Check the brightness setting in the Printer Driver.
Adjusting Brightness
Is platen glass or ADF scan helper dirty?
Check 6
Clean the platen and surrounding.
Cleaning Platen and Document Cover
Cleaning the ADF (Auto Document Feeder)
Is paper feed roller dirty?
Check 7
Clean paper feed roller.
Cleaning Paper Feed Rollers
Note
• • Cleaning the paper feed roller abrades it, so do this only when necessary.
Is inside of printer dirty?
Check 8
During 2-sided printing, ink may stain the inside of the printer, smudging the printout.
Perform bottom plate cleaning to clean inside of printer.
Cleaning Inside the Printer (Bottom Plate Cleaning)
Note
• To prevent staining inside the printer, be sure to set the correct paper size.
Set longer ink drying time.
Check 9
This allows the printed surface to dry, preventing smudges and scratches.
• • For Windows:
Set the waiting time using Remote UI.
1. 1. Open Remote UI on the web browser of your device.
Configuration Changes / Display Printer Status Using Web Browser
2. Select Log in on Remote UI. 2.
Note
• If you specify the administrator password, enter the password.
3. Select Printer settings. 3.
603