Canon MAXIFY GX4070 Manual

有線連接 Wired Connection
確保在開始有線連接設定之前，印表機已開啟。
1.
如果電源開啟，電源(ON)指示燈(A)將亮起。
Make sure printer is turned on before starting wired connection setup.
If the power is on, the ON lamp (A) will be lit.
需要乙太網路電纜線(另行出售)。
2.
You will need an Ethernet cable (sold separately).
從印表機後部左側取下連接埠的蓋(B)。
3.
Remove the Cap (B) from the port located on the left side at the back of the printer.
使用乙太網路電纜線(C)連接印表機和網路裝置(路由器等)。
4.
請勿連接到任何其他連接埠。
Connect the printer and a network device (router, etc.) with an Ethernet cable (C).
Do not connect to any other port.
在 Windows 以有線 LAN 方式安裝及連接 MAXIFY GX4070 打印機
Installing MAXIFY GX4070 on Windows via wired LAN connection
1