Oki ES8462 User Manual page 171

Table of Contents

Advertisement

STATUS /
MESSAGE
CODE
Error
Writing Failed
Press <Stop> key
Error
USB Memory disconnected
Press <Stop> key
Error
Connect to PC Failed
Press <Stop> key
Error
Mirror Carriage Mode
Mirror carriage is locked.
Turn screws at 2 places shown in the
following figure, release the lock, and touch
the [Unlock] button.
Error
Memory Overflow Rx
Press <Stop> key
Error
Communication Error
Press <Stop> key
Error
Communication Error
Press <Stop> key
Error
Cannot store Fax job
Error
File Transmission Error
Press <Stop> key
Error
E-mail Transmission Error
Press <Stop> key
Error
Check SMTP Settings
Press <Stop> key
Error
Check POP3 Settings
Press <Stop> key
Error
SMTP Login Failed
Press <Stop> key
Error
SMTP Auth. Unsupported
Press <Stop> key
Error
POP3 Login Failed
Press <Stop> key
Error
Check LDAP Settings
Error
LDAP Login Failed
Error
LDAP Communication Error
Error
Searching for Address Failed
Error
Search Results Exceeded the Limit
Error
Search Root Error
Error
Address Search Time-out
MEANING / ACTION
Indicates that file saving has failed; file is
write-protected.
Indicates that the USB memory was
extracted and file saving has stopped.
Machine has failed to connect to a PC.
The scanner mirror carriage is locked.
Fax memory capacity overflow has occurred
during fax receiving.
Fax transmission has failed. For details press
the Fax Job View/Cancel button.
Fax receiving has failed. For details press the
Fax Job View/Cancel button.
Maximum number of delayed fax registration
has already been met.
File sending has failed due to file server
problems, network cable disconnected or
network trouble.
E-mail sending has failed due to mail server
problems, network cable disconnected or
network trouble.
Failed to connect with SMTP server.
Failed to connect with POP3 server.
Failed to login in SMTP server.
Authentication is unsupported by SMTP
server.
Failed to login in POP3 server.
Failed to connect with LDAP server.
Failed to login in LDAP server.
Communication with LDAP server has
disconnected.
Cannot find out the target address from the
LDAP server.
Search results from LDAP server exceeded
the upper limit.
Search root not found in LDAP server.
Search failed; time-out error.
Troubleshooting > 171

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mc862Mc852

Table of Contents