Table of Contents
Advertisement
Battery
Table 6-1
Battery description and part number
Description
Battery, 3 cell, 50 Wh, 4.33 Ah
NOTE:
HP recommends that the battery power cable be disconnected from the system board before
removing any part. You can disconnect the cable without removing the battery.
Before removing the battery, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover (see
To remove the battery:
IMPORTANT:
information. To prevent loss of information, save your work and shut down the computer through Windows
before removing the battery.
1.
Disconnect the battery cable from the system board (1).
2.
Remove the five Torx T8 2.5 × 4.0 screws (2).
Bottom cover on page
Removing a battery that is the sole power source for the computer can cause loss of
(Preparation for disassembly on page
32).
Spare part number
933321-855
32).
Component replacement procedures
45
Advertisement
Table of Contents
