Heath Zenith Secure Home DualBrite 4298 Installation And Operating Instructions Manual page 3

WIRING
WARNING: Turn power off at circuit
breaker or fuse.
Note: All wiring must be run in accordance with
the National Electrical Code through conduit
or another acceptable means. Contact a quali-
fied electrician if there is any question as to the
suitability of the system.
CAUTION: DO NOT connect the RED
wire unless you want to control other
lights from the motion sensor (see Op-
tional Wiring).
Black
Green
or Bare
White
One Motion Light
White
Black
Green
or Bare
Two Motion Lights
200259-02
Light
Fixture
Light Light
Fixture Fixture
Connect the fixture wires to the wires in the junc-
tion box. Twist the wires together and secure with
wire connectors.
Recommended Grounding Method
Use a green ground "pigtail" (not provided) and
twist one end together with the bare fixture wire
and the box ground wire. Secure with a wire
connector. Secure the other end of the "pigtail"
with the GND screw on the mounting plate.
Black to black
If you have metal junction box, you may not need
the green "pigtail". If you are unsure about the
grounding method, consult your local building
code.
3
White to white