Creating And Transmitting A Panorama Image; Saving A Custom Image To The Camera - Sony IPELA SNC-P5 User Manual

Main tab
Viewer
The created panorama image is displayed in the upper
viewer.
Note
The edges of the panorama image may not be displayed
correctly when the camera is zoomed in.
Make
Starts shooting to create a panorama image. It takes
about two minutes to create a complete panorama
image.
Note
The exposure and white balance settings are fixed while
a panorama image is being created. To create a clear
panorama image, set Exposure mode to Full auto and
White balance to Auto in the Camera setting menu and
point the camera to the main subject before starting
shooting.
File open
Allows use of a Bitmap or JPEG image file in spite of a
panorama image.
Note
The size of the image in the file should be 320 × 90
pixels (horizontal/vertical). Other image sizes are not
supported.
Send
Transmits a panorama image converted into a JPEG file
to the camera.
Creating and transmitting a
panorama image
1
Control PanTilt of the camera to face it to the
position, which will be the basis of the exposure
and the white balance.
The exposure and the white balance are fixed while
creating a panorama image.
2
Click Make button.
PanTilt of the camera moves, and it starts to create
a panorama image.
It takes about two minutes to create a panorama
image, then it is displayed on the top of Main tab.
3
Click Send button to send it to the camera.
Note
Do not perform settings of the camera or move the
camera during creating a panorama image.
Saving a custom image to the
camera
You can save a custom image to the camera in spite of
the panorama image shot by the camera.
Prepare the image to conform to the following
requirements:
• File format: JPEG or Bitmap
• Image size: 320 × 90 pixels (horizontal/vertical)
The camera does not support use of images that do not
conform to the above conditions.
1
Click File open on the Main tab.
The File dialog opens.
2
Select the image you have prepared.
3
Click Send to transmit the prepared image to the
camera.
The image is saved in the camera.
You can use the saved image when you control panning
and tilting from the main viewer.
Tip
The panorama image is the still image converted from
the image taken when you were going to create a
panorama image with "SNC panorama creator". When
the camera is moved or when the layout around the
camera is changed, create the panorama image again.
Using the SNC panorama creator — Creating a Panorama Image
81