Periodical Recording Tab - Setting The Periodical; Recording Mode - Sony IPELA SNC-P5 User Manual

Schedule: You can specify the period when the alarm
detection is effective in the schedule setting in the
other section.
Click Schedule and the setting menu for the effective
period is displayed. ("Setting the Schedule —
Schedule setting Menu" on page 63)
Alarm buffer
Select Use alarm buffer when you forward the image/
audio of before and after the alarm detection (pre-alarm,
post-alarm).
If you do not select it, only the image of the moment of
the alarm detection is forwarded.
Click Alarm buffer to display the Alarm buffer setting
menu.
For details, see "Setting the Alarm Buffer — Alarm
buffer setting Menu" on page 64.
OK/Cancel
See "Buttons common to every setting menu" on page
34.
Periodical recording Tab — Setting
the Periodical recording mode
You can set to record the image file to the memory
periodically.
Periodical recording
Select On when you want to use periodical recording. If
you select Off, the Periodical recording is not executed.
Image file name
Type the file name of the image recorded to the memory
up to 10 alphanumeric, - (hyphen) and _ (underscore).
58
Recording Images in Memory — Image memory setting Menu
Note
You cannot send the audio file by using the periodical
recording function.
Suffix
Select a suffix to add to the file name.
None: The recording file name will be the Image file
name.
Date & time: The date & time suffix is added to the
Image file name.
The date/time suffix consists of lower two-digits of
year (2 digits), month (2 digits), date (2 digits), hour
(2 digits), minute (2 digits), second (2 digits), and
consecutive number (2 digits), thus 14-digit number
is added to the file name.
Sequence number: A consecutive number of 10 digits
between 0000000001 and 4294967295 and two fixed
digits 00 is added to the Image file name.
Sequence number clear
Click Clear and the suffix of the sequence number
returns to 1.
Interval
Type the interval at which you want to record an image
in the memory periodically. You can set the hour (H),
minutes (M) and seconds (S) between 1 second and 24
hours (one day).
Note
The actual interval may be longer than the set value,
depending on the image size or the network
environments.
Efective period
Set the period when the periodical recording is effective.
Always: The periodical recording is always effective.
Schedule: You can specify the period when the
periodical recording is effective in the schedule
setting in the other section.
Click Schedule and the setting menu for the effective
period is displayed. ("Setting the Schedule — Schedule
setting Menu" on page 63)
OK/Cancel
See "Buttons common to every setting menu" on page
34.