Setting The Operations From The Viewer Page - Trigger Setting Menu - Sony IPELA SNC-P5 User Manual

Motion detection: To set the motion detection function,
click Motion detection. The Motion detection
setting page appears (see page 65).
Notes
• The motion detection function can activate or be set
only when the Video mode of the camera is set to
MPEG4 and the Cropping is set Off.
• In the case that the synchronized preset position is
specified, the alarm event that happens during moving
to the preset position will be invalid.
Alarm duration
Select the duration for which the alarm output is short-
circuited between 1 and 60 sec.
Effective period
This item is displayed when Mode is set to Alarm.
Set the period while the alarm detection is effective.
Always: The alarm detection is always effective.
Schedule: You can specify the period when the alarm
detection is effective in the schedule setting in the
other section.
Click Schedule and the setting menu for the effective
period is displayed. ("Setting the Schedule —
Schedule setting Menu" on page 63)
Schedule
This item is displayed when Mode is set to Timer.
Click Schedule and the setting menu for the effective
period is displayed. ("Setting the Schedule — Schedule
setting Menu" on page 63)
OK/Cancel
See "Buttons common to every setting menu" on page
34.
Setting the Operations
from the Viewer Page
Trigger setting Menu
Click Trigger on the Advanced mode menu to display
the Trigger Setting menu.
You can set the activities of when you click
icon of the main viewer in this menu.
e-Mail (SMTP)
Checking this box allows you to select e-Mail from the
trigger drop-down list in the main viewer.
By selecting e-Mail and clicking
moment you click is captured, and your e-mail with the
image file attached is sent to the specified mail address.
When you click e-Mail (SMTP) button, the Trigger (e-
Mail) setting menu is displayed. You can set necessary
options here. The setting options and setting procedures
are the same as those of the e-Mail (SMTP) setting menu
(page 50).
Note
While the Video mode is set to MPEG4, the image of
the composite video signal output from the video output
connector of the camera may be distorted during mail
transmission.
Setting the Operations from the Viewer Page — Trigger setting Menu
—
Trigger
, a still image of the
61