Mpeg4 Tab; Jpeg Tab - Sony IPELA SNC-P5 User Manual

MPEG4 Tab

Frame rate
Set the frame rate of the MPEG image.
Selectable values are 1, 2, 3, 4, 5, 6, 8, 10, 15, 20, 25, 30
fps.
"fps" is a unit indicating the number of frames
transmitted per second.
Bit rate
Set the bit rate of MPEG image transmission for a line.
Selectable values are 64, 128, 256, 384, 512, 768, 1024,
1536 and 2048 kbps.
Note
The selected frame rate and bit rate are a tentative value.
The actual frame rate and bit rate may be different
according to the image size, the shooting scene or the
network condition.
I-picture interval
Set the I-picture inserting interval of MPEG4. I-picture
is the compression data serving the basic point when the
data compressed by MPEG4 is depressed. In the
condition that errors tends to happen, such as the
network environment variation, the distortion of the
image is reduced by selecting a small value. The
selectable values are 1, 2, 3, 4 and 5 seconds.
Auto rate control
This function adjusts the frame rate and the bit rate
automatically so that a smooth image is played to suit
the connected computer environment. If On is selected,
the rate of MPEG4 image is automatically adjusted.
42
Setting the Camera Image and Audio — Camera setting Menu
Note
The maximum transmission rate will be the values set in
Frame rate and Bit rate.
OK/Cancel
See "Buttons common to every setting menu" on page
34.

JPEG Tab

Frame rate
Set the maximum frame rate of JPEG image that can be
monitored on the computer.
Selectable values are 5, 6, 8, 10, 15, 20, 25 and 30 fps.
"fps" is a unit indicating the number of frames
transmitted per second.
Image quality
Set the quality of JPEG image.
Selectable values are from Level 1 to Level 5.
When Level 5 is selected, the best picture quality is
achieved.
Bandwidth control
When the video mode is set to JPEG, the network
bandwidth output from the camera can be limited.
Selectable bandwidths are 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 2.0,
3.0, 4.0, and Unlimited Mbps. When you do not wish to
limit the bandwidth, select Unlimited.
OK/Cancel
See "Buttons common to every setting menu" on page
34.