Dell P137G Service Manual page 115

Table 19. System setup options—Virtualization menu (continued)
Virtualization
VT for Direct I/O
Enable Intel VT for Direct I/O
Intel Trusted Execution Technology
(TXT)
Enable Intel Trusted Execution
Technology (TXT)
Table 20. System setup options—Performance menu
Performance
Multi Core Support
Active Cores
Intel SpeedStep
Enable Intel SpeedStep Technology
C-States Control
Enable C-State Control
Intel Turbo Boost Technology
Enable Intel Turbo Boost Technology
Intel Hyper-Threading Technology
Enable Intel Hyper-Threading Technology
Dynamic Tuning:Machine Learning
Enable Dynamic Tuning:Machine Learning Enables the operating system capability to enhance dynamic power tuning
Table 21. System setup options—System Logs menu
System Logs
BIOS Event Log
Clear Bios Event Log
Thermal Event Log
Clear Thermal Event Log
Specify whether a Virtual Machine Monitor (VMM) can utilize the additional
hardware capabilities provided by Intel Virtualization Technology for Direct I/O.
By default, the option is enabled.
Specifies whether a measured Virtual Machine Monitor (MVMM) can utilize
the additional hardware capabilities provided by Intel Trusted Execution
Technology.
By default, the option is disabled.
Enables to change the number of CPU cores available to the operating system.
By default, the All Cores options is enabled.
Enables the computer to dynamically adjust processor voltage and core
frequency, decreasing average power consumption and heat production.
By default, the option is enabled.
Enable or disable additional processor sleep states.
By default, the option is enabled.
Enable or disable Intel TurboBoost mode of the processor.
By default, the option is enabled.
Enable or disable Hyper-Threading in the processor.
By default, the option is enabled.
capabilities based on detected workloads.
By default, the option is disabled.
Display BIOS events.
By default, the Keep Log option is enabled.
Display Thermal events.
System setup 115