Steps
1. Align the screw hole on the left hinge with the screw hole on the display back cover.
2. Replace the two (M2.5x5) screws to secure the left hinge to the display back cover.
3. Align the screw hole on the right hinge with the screw hole on the display back cover.
4. Replace the two (M2.5x5) screws to secure the right hinge to the display back cover.
Next steps
1. Install the
display
panel.
2. Install the
display
bezel.
3. Install the
display
assembly.
4. Install the
WWAN
card.
5. Install the
WLAN
card.
6. Install the
base
cover.
7. Install the
microSD
card.
8. Install the
SIM
card.
9. Exit
Service
Mode.
10. Follow the procedure in
After working inside your
computer.
Removing and installing components
93