TRENDnet User's Guide
Front View
1. Mounting base
2. Horizontal stand
3. Vertical stand
4. Lower dome
5. 10/100Mbps PoE network port
6. Power port (optional)
7. Infra‐red lamps
8. Lens
9. Black Liner
10.
Safety rope
© Copyright 2018 TRENDnet. All Rights Reserved.
Angle Adjustment
Loosen the tilt lock screws, adjust the tilting position in a range, and tighten
the tilt lock screws.
Reset Button
Push and hold the reset button then power on the camera. Keep holding the
reset button for more than 10 seconds to reset configuration to factory
default.
TV‐IP315PI
Reset Button
6