Table of Contents
Advertisement
TRENDnet User's Guide
Live View
After you log‐in into the camera management page, you'll see the Live View page.
Snapshot
Click this icon to take a video snapshot.
Zoom
Click once to enable zoom. When
enabled, click and drag the area on the
picture to zoom in. Right click to
resume 100% zoom. Click the icon
again to disable zoom. The zoom
function works in full screen mode as
well.
Recording
Click once to start recording. Click it
again to stop recording. The status bar
will indicate if it is in recording state or
not.
Video Stream
Camera has two video streams: H.265, H.264 and
MJPEG. Switch to view the different video streams by
clicking this icon. (For Internet Explorer and Safari only,
Google and Firefox stream Third steam resolution by
default)
© Copyright 2018 TRENDnet. All Rights Reserved.
Full Screen Mode
Click the picture to view in full screen
mode. Double click again or press
escape key on your keyboard to exit
full screen mode.
Status Bar
The status bar shows the status you
are at, including enabled the zoom,
recording video, and successfully
taking a snapshot.
TV‐IP315PI
17
Advertisement
Table of Contents
