Table Of Contents; Relationship To The Authorities; Technical Data - Jøtul F 145 S Installation And Operating Instructions Manual

Table of contents

Installation manual with technical data
1.0 Relationship to the authorities ...................55
2.0 Technical data ..........................................55
3.0 Safety ........................................................59
4.0 Installation .................................................59
5.0 Daily use ...................................................64
6.0 Service ......................................................65
7.0 Maintenance ..............................................66
8.0 Operational problemes -
troubleshooting ..........................................67
9.0 Optional Equipment / Delivery units .........67
10.0 Guarantee terms .......................................68
Register your fi replace at jotul.com for a
25-year warranty.
On all our products there is a label
Product:
Jøtul
indicating the serial number and
Room heater fired by solid fuel
year. Write this number in the
Standard :
Minimum distance to adjacent combustible materials:
Minimum distance to adjacent combustible materials:
place indicated in the installation
Emission of CO in combustion products
:
Flue gas temperature :
Nominal heat output :
Efficiency : instructions.
Operation range :
Fuel type
:
Operational type :
The appliance can be used in a shared flue.
Always quote this serial number
Country Classification Certificate/ Approved by
standard
Norway Klasse II
when contacting your retailer or
SP Sveriges Provnings- och
SP
Sweden OGC
Forskningsinstitut AB
Jøtul.
SP Swedish National
Testing and Research
EUR Intermittent EN
Institute
Follow user`s instructions. Use only recommended fuels.
Montage- und Bedienungsanleitung beachten.
Verwenden Sie nur empfohlenen Brennstoffen.
Respectez les consignes d'utilisation. Utilisez uniquement
les combustibles recommandés.
Serial no: Y-xxxx, Year: 200x
Serial no.
Manufacturer: 221546
Jøtul AS
POB 1441
N-1602 Fredrikstad
Norway
1.0 Relationship to the
authorities
Installation of a fi replace must be according to local codes and
regulations in each country.
All local regulations, including those that refer to national and
European standards, shall be complied with when installing
the product.
Before use read the Installation and Operating Instructions
carefully. We recommend that the installed product be
inspected by a qualifi ed professional before use.
A heat-resistant rating plate is attached to the rear of the
heat shield. This contains information about identifi cation and
documentation for the product.

2.0 Technical data

Material:
Finish:
Fuel:
Log length, max.:
Flue outlet:
Flue pipe dimension:
Weight with convection panels:
Weight with soapstone panels:
Dimensions, distances:
Technical data according to EN 13240:
Nominal heat output:
Effi ciency:
Recommended chimney draught: 13 Pa
CO emission (13% O ):
2
CO emission (13% O ):
2
chimney temperature:
Operational type:
Intermittent combustion in this context means normal use of
the fi replace, i.e. fuel is added as soon as the fuel has burnt
down to a suitable amount of embers.
ENGLISH
Cast iron
Black paint
Wood
30 cm
Top, rear
Ext: Ø 125 mm / Ø130 mm
Approx. 94 kg
Approx. 178 kg
See fi g. 1
4 kW
77%
0.09%
1178 mg/Nm 3
269 o C
Intermittent
55