Table of Contents
Advertisement
Condition of Belt
Cracks or splits
One or more strands of belt is hanging out,
or if there is a significant amount of frayed
belt.
Inspect Other Items
Inspect other items for proper operation, damage, or wear.
Inspect grips for looseness or wear.
Inspect all labeling for readability, including instructional
placards, warning and caution decals.
Inspect all weight stacks for proper alignment and operation.
Inspect guide rods for lubrication.
Yearly Procedures
Replace all cables and belts annually
Cable Adjustment
Tools Required
9/16" Wrench (2)
Inspection
3D View
Replace all loose or worn grips immediately.
Replace all worn labeling immediately.
Correct all improper alignment and operation issues
immediately.
Wipe Weight Stack Guide Rods clean over entire length. Lubricate
with a light coat of medium weight automotive engine oil.
Page 21 of 26
3D or Side View
Action
Advertisement
Table of Contents
