Table of Contents
Advertisement
Climatic dry air may cause static electricity. During workout, user may experience a shock due to build up of static electricity on the
body and the discharge path of the unit. If static electricity is experienced, increase humidity to a comfortable level through the use of
a humidifier.
Do not install, use or store the unit in an area of high humidity, such as in the vicinity of a steam room, sauna, indoor pool or outdoors.
Exposure to extensive water vapor, chlorine and/or bromine could adversely affect other parts of the unit.
Temperature
The unit is designed to function normally in an environment with an ambient temperature range of 50° F (10° C) to 104° F (40° C). The
unit can be shipped and stored in an environment with an ambient temperature range of 32° F (0° C) to 140° F (60° C).
Verify parts list below
Qty
Part Number
2
3
1
11
14
Tools Required
•
7/32" Allen wrench
•
3/4" Socket wrench or Open end wrench
•
Torque wrench
•
Phillips screwdriver
•
Medium weight automotive engine oil
Assembly Procedure
Two people will be required for this procedure.
TIP: Read and understand all instructions thoroughly before assembling this unit. Check all items carefully. If there is damage, see the
Customer Service section of this manual for proper procedure to return, replace, or reorder parts.
12090-322
13000-353
14000-401
4000C101
Weight Stack Plate (Standard)
4000C101
Weight Stack Plate (Heavy)
Description
Foot Pad
Foot Pad
Decal, Weight Plate
Page 9 of 26
Diagram
Advertisement
Table of Contents
