Graco B Series Manual
Hide thumbs
Also See for B Series:
- Instructions-parts list manual (45 pages) ,
- Instruction manual (18 pages) ,
- Instructions manual (10 pages)
Table of Contents
Advertisement
Quick Links
Repair
Parts
TexSpray 1030 FCt
TexSpray Gun
1000 psi (7.0 MPa, 70 bar) Maximum Working Pressure
140 psi (0.9 MPa, 9 bar) Maximum Air Working Pressure
Model 245872, Series B
Patents Pending
Read warnings and instructions.
Contents
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440-1441
Copyright 2002, Graco Inc. is registered to I.S. EN ISO 9001
'
2
3
4
. . . . . . . . . . . . . .
5
. . . . . . . . . . .
6
6
7
8
9
9
9
9
309661
Rev. D
ti2313a
Advertisement
Table of Contents
Related Manuals for Graco B Series
Summary of Contents for Graco B Series
-
Page 1: Table Of Contents
......GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440-1441 Copyright 2002, Graco Inc. is registered to I.S. EN ISO 9001... -
Page 2: Warnings
INSTRUCTIONS D Do not exceed maximum working pressure of lowest rated system component. D Do not alter or modify this equipment. Use only genuine Graco parts and accessories. D Do not use hoses to pull equipment. D Use fluids or solvents that are compatible with equipment wetted parts. See Technical Data section of all equipment manuals. - Page 3 Component Description Air Nozzle Air Control Knob MateriaL Control Knob Air Inlet Trigger Lock Material Inlet ti2313a 309661...
-
Page 4: Installation
Installation Eye Protection Hazard; page 2 1. Do Pressure Relief Procedure. See your system manual for correct procedure. 2. Connect air and material hoses to gun and tighten securely. 3. Install disc (2) on front of adapter (3) with retaining ring (1). -
Page 5: Air Cap And Nozzle Changes
Air Cap and Nozzle Changes Exterior or interior air caps may be used with nozzles 4. Fig. 5. Loosen and remove old air cap (5) with and spray discs for different finishes, or with nozzles deep socket wrench. only. 1. Fig. 2. Select exterior or interior air cap. Exterior Interior Fig. -
Page 6: Spray Disc And Nozzle Selection
Spray Disc and Nozzle Selection Fig. 7. Three spray discs (2) and five nozzles (4) are For smaller droplet sizes reduce nozzle (4) and/or disc supplied with the sprayer. The nozzles are numbered (2) size and increase gun atomizing air by turning the 4, 6, 8, 10, and 12 which designate the orifice size in air control knob (17) counter–clockwise. -
Page 7: Service
Service 4. Clean and replace any damaged parts. Air valve needle Fluid valve Fluid inlet Air or fluid leakage at front of gun (Install Air inlet 234229 gun rebuild kit components) 1. Follow Pressure Relief Procedure. Remove and replace 1. Follow Air Cap and Nozzle Change instructions to remove air cap (5) and air valve (6). -
Page 8: Parts
Parts Model 245872, Series B Includes items 1 to 34 Torque to 20 – 30 in-lb 234229 Gun Rebuild Kit includes 6, 7, 9, 10, 11, and 34 234235 Nozzle Kit includes 1, 1a, 2 – 5 234238 Air Valve Kit includes quantity 5 of item 6 ti2314a... -
Page 9: Technical Data
....104dB(A)* Graco Phone Number TO PLACE AN ORDER, contact your Graco distributor, or call 1–800–690–2894 Toll Free, to identify the distrib- utor closest to you: 309661... -
Page 10: Graco Warranty
Graco distributor to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective.