Baofeng UV-82 User Manual page 23

BAOFENG UV-82
Instrukcja obsługi / User Manual
On-ear headphone with mic installation
Insert the plug of the one-ear headphone with mic cable into the SP and MIC sockets as shown in the
picture on the below.
Battery installation
During installation, the battery must be held parallelly and fit the aluminum frame. The bottom of the
battery should be 1 to 2 cm below the shortwave radio's housing. Install the battery in the device ac-
cording to the graphic instructions below – just move the battery up parallelly until you hear a click.
To remove the battery (turn off the device before removing it), slide the battery down.
22