Remote Control; General Control - Sharp HT-SB200 Operation Manual

Remote control (continued)
HT-SB200
Caution:
●
Do not use rechargeable battery (nickel-cadmium battery, etc.).
●
Danger of explosion if battery is incorrectly replaced.
●
Replace only with the same or equivalent type.
●
Batteries (battery pack or batteries installed) shall not be
exposed to excessive heat such as sunshine, fire or the like.
●
Installing the battery incorrectly may cause the speaker to
malfunction.
Notes concerning use:
●
Replace the battery if the operating distance is reduced or if
the operation becomes erratic. Purchase "CR 2025", coin
lithium battery.
●
Periodically clean the transmitter on the remote control and
the sensor on the speaker with a soft cloth.
●
Exposing the sensor on the speaker to strong light may
interfere with operation. Change the lighting or the direction
of the speaker if this occurs.
●
Keep the remote control away from moisture, heat, shock,
and vibrations.
■ Test of the remote control
Point the remote control directly at the remote sensor on the
speaker.
The remote control can be used within the range shown
below:
Press the ON/STAND-BY button. Does the power turn on? Now,
you can enjoy your system.
16
Remote sensor
STANDARD CINEMA / GAME
SPORT NEWS
ON/STAND-BY VOL. SURROUND FUNCTION
SOUND BAR SYSTEM HT-SB200
8" - 20'
(0.2 m - 6 m)
15˚ 15˚

General control

STANDARD
SPORT
ON/STAND-BY VOL.
SOUND BAR SYSTEM HT-SB200
■ To turn the power on
Press the ON/STAND-BY button.
●
The power indicator turns green. If the power does not turn
on, check whether the power cord is plugged in properly.
To set the speaker to stand-by mode:
●
Press the ON/STAND-BY button again.
The STAND-BY indicator turns red.
■ Display brightness control
Press the DIMMER button to adjust the brightness of the display
and sound mode indicator.
Sound mode indicator and display bright
Sound mode indicator and display dim
Sound mode indicator and display off. Pressing
any button will light up the display for 3 seconds only.
■ Volume auto fade-in
If you turn off and on the speaker with the volume set to 40 or
higher, the volume starts at 20 and fades in to the last set level.
■ Volume control
Speaker operation:
Press volume up (VOL. +) to increase
the volume and press volume down
(VOL. –) to decrease the volume.
CINEMA / GAME
NEWS
SURROUND FUNCTION
00 01 02 ..... 59 60