Connecting To A Television Via Miracast - TrekStor SurfTab twin 11.6 Operating Instructions Manual

Connecting to a television via Miracast

Miracast technology is a peer-to-peer standard for image
transfer. The SurfTab supports this standard and enables wireless
transfer of image and sound from the SurfTab to a WiFi- and
Miracast-enabled television device.
i
NOTE
The SurfTab can connect to your television via Miracast
only if the television also supports Miracast technology.
Please check with your television manufacturer if necessary.
Proceed as follows to connect your SurfTab to a Miracast-
enabled television:
a) First, take all of the necessary steps to prepare your Miracast-
enabled television for the Miracast transfer (see your
television's operating instructions for details).
b) Call up the settings (see Section 13).
c) In Settings, tap "d
"C
onneCted deviCes
d) Now tap "A
for available devices. This process may take a moment. All
available devices are then displayed in a pop-up window.
e) Tap the device that you wish to connect to. The two devices
now connect to each other.
f ) A short time later, the selected device will show the display
of the SurfTab.
" and in the following window tap
eviCes
" on the left.
" in the top centre. The SurfTab searches
dd A deviCe
46 EN