TrekStor SurfTab twin 11.6 Operating Instructions Manual page 37

WPA
If a WPA network key was assigned for your router, enter it in the
input field and click "n
WPS
If a WPS authentication method (for example, a PIN) was set up for
your router, the SurfTab shows a different input field. Enter the PIN
in the input field (or follow the selected authentication method).
The SurfTab now connects to the wireless network.
i
NOTE
You may be asked whether the SurfTab should search for
additional devices in the selected network and whether it
should automatically connect to these devices (for example,
printers or television sets). This is recommended in private
home networks that you can trust. If you connect to a
public wireless network, we recommend that you decline
this option by tapping "n
In this way, you protect your private sphere.
You can now surf the Internet as usual using the Internet browser.
i
NOTE
To deactivate the WiFi connection, use the tip of your finger
to move the slider for WiFi from right to left.
The word "o
" to confirm.
ext
".
o
" now appears next to the slider.
ff
37 EN