Connecting The Surftab To A Television; Connecting To A Television Via Miracast - TrekStor SurfTab wintron 7.0 Operating Instructions Manual

13) Connecting the SurfTab to a television

You can transfer the image and sound from the SurfTab to a suitable television
via Miracast.

Connecting to a television via Miracast

Miracast technology is a peer-to-peer standard for image transfer.
The SurfTab supports this standard and enables wireless transfer of image
and sound from the SurfTab to a WiFi and Miracast-enabled television device.
The SurfTab can connect to your television via Miracast only if the television also
i
supports Miracast technology. Please check with your television manufacturer if
necessary.
Proceed as follows to connect your SurfTab to a Miracast-enabled television:
a) First, take all of the necessary steps to prepare your Miracast-enabled
television for the Miracast transfer (consult your television's operating
instructions for details).
b) Go to Settings (see Section 9).
c) In Settings, tap "D
on the left.
d) Next tap "A
DD A DeviCe
This process can take a moment. All available devices are then displayed in a
pop-up window.
e) Tap the device that you wish to connect to. The two devices now connected
to each other.
f ) A short time later, the selected device will show the display of the SurfTab.
If your television device does not support Miracast technology, a "Miracast
i
dongle" can be used to connect the SurfTab via Miracast. In this case, you must
ensure that the selected dongle is compatible with both the SurfTab and your
television.
EN
20
" and in the following window tap "C
eviCes
" in the top centre. The SurfTab searches for available devices.
"
onneCteD DeviCes