11 SERVICE WORK ON THE CHASSIS
56
–
Mount the chain.
–
Connect the chain with connecting link
Guideline
The closed side of the chain joint lock must face in the
direction of travel.
120325-10
–
Position the foot brake cylinder.
Push rod
Info
Ensure that the dust boot is correctly seated.
–
Mount and tighten screws
Guideline
Remaining screws,
K01098-01
chassis
–
Position the angle lever and linkage lever.
–
Mount and tighten fitting
Guideline
Nut, linkage lever on
angle lever
Info
Pay attention to flat area
F00425-10
–
Mount and tighten screw
Guideline
Screw, bottom
shock absorber
Info
Raise the swingarm slightly to be able to mount the
screw more easily.
–
Attach frame protector in area
–
Mount and tighten screws
Guideline
Screw, frame pro-
tector
–
Mount the new cable ties.
V01317-11
Finishing work
–
Check the free travel of the foot brake lever. (
–
Remove the motorcycle from the lift stand. (
3
4
engages in the foot brake cylinder.
5
.
M6
10 Nm (7.4 lbf ft)
6
.
M14x1.5
60 Nm (44.3 lbf ft)
B
.
7
.
M10
60 Nm (44.3 lbf ft)
C
and position it.
8
with the washers.
M5
3 Nm (2.2 lbf ft)
.
®
Loctite
2701™
p. 81)
p. 44)