Husqvarna FS 450 2022 Owner's Manual page 51

SERVICE WORK ON THE CHASSIS 11
–
Position the upper triple clamp with the handlebar.
–
Mount screw
Guideline
Screw, top steering
head
V01434-10
–
Position the fork legs.
Air bleeder screw
the front.
A
Valve
Info
Grooves are milled into the side of the upper end of
the fork legs. The second milled groove (from the top)
must be flush with the upper edge of the upper triple
H03252-12
clamp.
The air suspension is located in the left fork leg. The
pressure and rebound damping is located in the right
fork leg.
–
Tighten screws
Guideline
Screw, bottom triple
clamp
V01435-10
–
Tighten screw
Guideline
Screw, top steering
head
V01436-10
–
Mount and tighten screw
Guideline
Screw, top
steering stem
V01437-10
4
, but do not tighten yet.
M20x1.5 12 Nm (8.9 lbf ft)
5
of the right fork leg is positioned to
of the left fork leg faces the front.
6
.
M8 12 Nm (8.9 lbf ft)
4
.
M20x1.5 12 Nm (8.9 lbf ft)
7
.
M8 20 Nm (14.8 lbf ft)
®
Loctite 243™
49